In the course of unfolding the stitched halves. the starboard bottom panel did a reverse flex and cracked just before the bow. will patch with glass on the inside and sand smooth. nothing terminal yet. I did need to add a little reinforcement at the bow to get things lined up better. It is pretty spectacular when this thing unfolds. I recommend an extra pair of hands here.
border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiLkL8OlUs9E41jLjqW4hAF3YkmcgoW8ym0GE0TyUR-BS700HP9t_BJ0Wq8afYXuvijMaYfq-PylReFVIDSCiY9JrZcJHK2njYkiRKmrCvB8Bht9avK5wdw8UbIV2Ot12R1Y2CPWlCEtZ0/s640/blogger-image-1273168949.jpg">
This crack was not as bad as it looked. a couple of layers of glass set in epoxy on this side, backed up by a scrap piece of 1/4" ply set over release film and screwed in place created an almost invisible yet strong joint. Sad to say, I have had to do this process many times while building boats.
Jumat, 04 November 2016
0 komentar:
Posting Komentar